Dobinsons Extended Rear Sway Bar End Link Kit Compatible with Toyota 4Runner 2003 to 2018, FJ Cruiser, Prado 120 and 150 - SE59-529

These are adjustable sway bar extensions to suit 2" to 4" of lift, allowing your sway bar to work properly and reset back to it's factory riding angle on the road. Adjust the rod length according to your lift height, and so that the sway bar is riding as close to a factory position as possible. The base setting should be to add half of your lifted height to the stock length. Take new links, make them the same length as stock, then add exactly half of the lifted lift height amount to them, and check for clearances. If they're set too long, they will contact the trailing arm. Gold zinc plated, high quality OE style ball end joints, sealed for long life, this kit includes all that you will need. NOTE: Will not work on any vehicle with KDSS.

• Suits 4th and 5th Gen 4Runner, FJ Cruiser (all years), and Prado 120 and 150 (all years) - WITHOUT KDSS
• Heavy Duty, zinc plated, with high quality ball joint ends for long life
• Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
• Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
• Adjustable to suit lift heights of 2" to 4". Set length to same as stock length and add half of the lifted height